Tousek SWING X gate automation

« Back

TECHNICAL INFORMATION:

MODEL	SWING X3	SWING X3 LH	SWING X4	SWING X4 LH	SWING X5 LH
max weight of wing	500 kg	500 kg	500 kg	500 kg	500 kg
max width of wing	3,0 m	3,0 m	4,0 m	4,5 m	5,0 m
speed	14,5 mm/min	14,5 mm/min	11 mm/min	11 mm/min	11 mm/min
max opening angle	100°	120°	110°	120°	120°
cycles / intensity	40 %	40 %	40 %	40 %	40 %
extension	320 mm	450 mm	320 mm	450 mm	450 mm
max feed force	4000 N	4000 N	5000 N	5000 N	6500 N

ADVANTAGES:

Masywna jednostka napędowa dla pewnego przełożenia siły
Samohamowna śruba napędowa dla najwyższej stabilności
Wysokojakościowe materiały dla długowiecznej pracy
Zintegrowane odbojniki dla ułatwionego montażu
Komfortowe odryglowanie awaryjne
Inteligentna centralka Plug&Play dla najwyższego komfortu obsługi
Seryjny softstop (miękki stop) dla płynnego ruchu
Automatic Revers System ARS dla maksymalnego bezpieczeństwa
Przemyślany koncept mocowań siłownika dla płynności ruchu

SET:

1 x CENTRAL
2 x SWING ACTUATOR
1 x RS 868 2-channel receiver, integrated with internal antenna
2 x REMOTE CONTROLS RS 868-2M, 2-cannals
1 x PHOTOCELLS LS41

EXAMPLE OF USE

	Massive motor-gear unit for reliable power transmission To ensure a long-term operation, we have located the gearing of the SWING X in a torsion resistant aluminium housing. Moreover, a drive unit made of hardened steel ensures extra stability. In addition, the strong 230VAC motor easily provides the necessary force to automate heavy swing gates.
	Standardsoft stopforsmoothgate movement In combination with the control board ST61 the SWING X operator stops in both directions at reduced speed. This enables a harmonic gate movement and prevents damage on the operator mechanical parts and on the gate.
	Smart Plug & Play controls for maximum operating comfort The SWING X operator is combined with an especially designed microprocessor control. The main focus of all of our control units is the easy adjustment of all functions.
	ARS Automatic Reversal System for maximum safety Thanks to its integrated speed sensor, the motor is provided with an automatic reversal system - ARS. If the gate meets an obstacle, the SWING X stops immediately and reverses automatically. The highest level of security.
	High quality materials for long-term operation The materials used in the entire operator - such as aluminium, stainless steel or galvanized steel - ensure a trouble-free operation for many years to go. Unlike the open hydraulic systems, by installing a SWING X motor you can completely forget the tedious fiddling with the oil.
	Self-locking spindle for maximum stability An extremely massive spindle in combination with a generously sized spindle socket made of brass guarantee a long and reliable operation. Of course, the spindle is supported at both ends. Thus prevents undesired vibrations.
	Integrated limit stops for easier installation In order to avoid a limit stop on the floor - which can be dangerous and annoying - the operator has a built-in mechanical limit stop.
	Comfortable emergency release The emergency release, which is important in case of power failure, is lockable with a standard profile half cylinder. It can therefore be replaced and integrated into an already existing house key system.